銷售德國SEW現場分配器,賽威現場分配器型號

The gear unit can be connected to the bus via terminal or M12 plug.

With the diagnostic interface and LED signal, the fault can be easily through the bus for fault diagnosis.

Fieldbus distributor to achieve the power supply system, 

配備混合電纜的MOVIMOT?驅動器可以在幾秒鐘內與現場總線分配器連接，

然后就可以準備運行了。服務過程中，即使是一個沒有經過技術培訓的人，

斷開插頭連接都沒有任何危險。該套系統是需要高運行系統的選擇。

DC24V control voltage and fieldbus and drive the rationalization of the connection.

They are bus interface technologies based on decentralized connection to additional networks. 

The fieldbus distributor is close to the motor installation,

This facilitates decentralized installation. 

Modular plugs make system troubleshooting and maintenance very easy, especially when a fault occurs.

我們的混合動力電纜在，它是將供電、

控制和通訊電纜全部組合在了一個電纜護套中的連接電纜。

同時，了較佳的EMC屏蔽和阻抗。

The DBG60B panel can control the MOVIMOT? drive via the fieldbus interface in manual mode.

The DBG60B panel is directly connected to the diagnostic interface of the MF ../ MQ .. fieldbus interface.

The fieldbus interface supports the most commonly used fieldbus systems such as PROFIBUS, PROFIsafe,

INTERBUS, CANopen, DEVICENet and AS bus.

混合動力電纜連接MOVIMOT?到現場總線分配器，

這根電纜將通訊接口、供電和控制結合起來，并作為預制電纜和插件連接提供。

The fieldbus interface consists of a terminal block module with a connection terminal and a pluggable fieldbus module.

They can be installed directly on the drive as required, installed in the field or bus distributor.

The variable MOVIMOT? drive is connected to the bus via terminals. According to the configuration,

Nearest sensor, actuator or non-closed loop controlled MOVI-SWITCH

銷售德國SEW現場分配器,賽威現場分配器型號