VICKERS美國臥式動力單元出售，威格士動力單元結構原理

  上海乾拓貿易有限公司 

　企業QQ：2880626087

　電話；021-69001039

　手機；17321017802（微信）

　郵箱；17321017802@163.com

　地址：上海市嘉定區江橋嘉涌路99弄6號713室

 Ensure that the relief valve setting does not exceed the pressure rating of the unit 

過熱組件會造成灼傷，泄漏和組件過早失效的可能。

溫度計?用于定制應用的可選配件的長列表?可選的卡特勒錘式電機起動器...易于安裝

免費送貨至美國各地...大部分單位的五天交貨我們提供技術服務，

根據您的具體要求定制單位;從基本功率單元到定制設計系統。

Piston, Vane  &  Gear pumps, Pressures to 4,250 psi

Contact your Eaton Representative for more Information at 517-789-7220 or Fax us at 517-789-1715. www.eatonhydraulics.com

Standard Features ? Continuous-duty Rated Electric Motors… for Durability and Long Life

 ? Aeroquip   Hose & Fittings… Leak Free Design ? Lift-off Tops… for Easy Maintenance 

? Close-coupled Pump & Motor… for Easy Service and Reliability 

? Standard Relief Valve, and Pressure Level / Temperature Gauges… for System Protection 

? Long List of Optional Accessories… for Custom Applications ? Optional Cutler-Hammer   Motor Starters… for Ease of Installation

Free Delivery Anywhere in the Contiguous USA… Five-Day Delivery on Most Units

Now, More Choices In Vickers  Power Unit Offerings. Whatever the Industry…Whatever the Application.

Standard Power Units

System Overhead

標準特點?連續功率額定電機...耐久性和長壽命?空氣軟管和配件?無泄漏設計?提升頂部?易于維護

?緊密耦合的泵和電機，便于維護和性?標準泄壓閥，以及用于系統保護的壓力水平儀

 and means of motor disconnection to avoid electric shock and fire hazards. 

2. Avoid the potential for oil spills and slippery floor conditions by: ? Maintaining oil reservoir on a level surface 

? Maintaining leak-free hydraulic hose or pipe connections to the unit ? Not overfilling the unit with hydraulic fluid. 

3. Exceeding the recommended operating temperatures may cause system components to become too hot to handle. 

Overheated components create a potential for burns, leaks, and premature component failure.

or of the lowest rated component connected to the power unit.  The system pressure setting 

should be within the horsepower specifications of the unit’s electric motor.  Use the formula HP = PSI 

* GPM * 0.00073 for a general guideline. Refer to tables on Page 9 for specific operation limitations.

 5. Ensure all pressure is released from the system before attempting to remove or repair any valve,

 pump, or component of the system. Failure to follow this procedure

 may result in the release of pressurized hydraulic fluid that has the potential to cause severe personal injury. 

6. Ensure that all electrical power is disconnected at the junction box before attempting removal 

or repair of any electric motor starter, valves, or pumps, or other components in the system.

1.根據國家電氣規范（NEC）和職業安全與健康法（OSHA）進行所有電氣連接，分析電路保護和電機斷開裝置，以避免觸電和火災。

 2.通過以下方式避免漏油和滑溜的情況：?將油箱保持在水平面上?維護無泄漏的液壓軟管或管道連接到本機

?不要用液壓油過量填充設備。過TJ的工作溫度可能會導致系統組件變得太熱而無法處理。

 We offer technical services to customize units for your specific requirements; from basic power units to custom-engineered systems.

Read General Safety Information carefully before attempting to assemble, install, 

operate, or maintain these products. Failure to comply with these 

instructions may result in personal injury and/or property damage. Retain these instructions for future reference.

1. Make all electrical connections in accordance with the National Electrical Code (NEC) 

and Occupational Safety and Health Act (OSHA) regarding branch circuit protection

4.確保安全閥設置不過設備的額定壓力或與功率單元連接的較額定分量。系統壓力設置應在本機電動馬達的功率規格范圍內。

使用公式HP = PSI * GPM * 0.00073作為一般準則。 5.在嘗試卸下或修理系統的任何閥門，泵或組件之前，

確保所有壓力從系統中釋放。不遵守此程序可能導致釋放可能導致嚴重人身傷害的加壓液壓油。 

6.在拆卸或修理任何電動起動器，閥門或泵或系統中的其他部件之前，確保接線盒上的所有電源都斷開連接

VICKERS美國臥式動力單元出售，威格士動力單元結構原理